FIRE SERVICE
“Everyone Goes Home Safe”
ColdFire™ is the next generation in fire fighting
Cold Fire™ was designed to save lives. It’s cooling properties work to remove heat and fuel sources. This allows officers to immediately touch the burnt surface, whether a car door or a piece of equipment.
Further, Cold Fire™’s non-toxic properties benefit both the environment, officers and fire victims. Because the product does not contain any harmful or corrosive chemicals, Cold Fire™ can be sprayed directly on a fire victim and its cooling properties will allow a fast, potentially live-saving medical response.
COLD FIRE TACTICAL FOR SPECIAL UNITS
Cold Fire™ will extinguish class A & B fires – including grass and brush, also cars, tires, metals, hydrocarbon fuels like gas and diesel, and polar solvents like acetone and ethanol. It is completely non-toxic and biodegradable. Cold Fire wetting agent is classified by Underwriters Laboratory (UL File EX4660) for Class A and B fires* and is on the EPA’s Significantly New Alternative Policies product list.
*Cold Fire wetting agent concentrate, when added to water in concentrations of not less than 0.15% for Class A fires and not less than 1.5% for Class B fires.
- UL Listed Wetting Agent for Class A & B Fires.
- UL 162 applicable portions of the Standard for Foam Equipment and Liquid Concentrates
- UL 711 for Class B fires.
- Listing #2N75 -Tested in accordance with NFPA 18 Standard for Wetting Agents
- C-UL listed. File #: Cex1225. Investigated and found to be in compliance with the requirements under ULC Subj. C175.
- PFAS/PFOA Free
Why people choose Cold Fire™
- Cold Fire wetting agent is UL Classified, UL File EX4660*
*Cold Fire wetting agent concentrate, when added to water in concentrations of not less than 0.15% for Class A fires and not less than 1.5% for Class B fires. - U.S. Forest Service approved agent for wildfire applications.
- EPA-SNAP (Significantly New Alternative Policy Program) listed.
- NTOA Member Tested & Recommended.
- Considered an acceptable substitute to toxic foams and Halon.
- Non-toxic.
- Non-corrosive—product can be dumped directly into booster tank. No need to flush out lines.
- Biodegradable.
- Unique thermal insulation capability. Helps to minimize heat exhaustion.
- Extinguishes fires rapidly and on contact.
- Prevents re-ignition when properly applied.
- Encapsulates and breaks down hydrocarbons; thereby reducing hydrocarbon smoke and increasing visibility.
- Enhances the penetration capability of water, extinguishing the fire faster, using less water, and thereby reducing water damage and water supply needs.
- Clean.
- Non-slip.
- Indefinite shelf life when stored in closed containers. Store in a booster tank, water pressurized units or closed loop system for use anytime.
- No specialized training required.
- No specialized safety equipment is needed.
- Non-hazardous and safe to handle and apply.
- Does not harm the environment, officers or fire victims.
ORDER TODAY
1-888-514-4976
COLD FIRE™ FIRE SERVICE PRODUCT
NEW! INTRODUCING A NEW WEAPON AGAINST FIRE FOR FIRE SERVICE.
Cold Fire’s Cooling Effect makes it an advantageous fire fighting product. Not only odes this unique characteristic assist in extinguishing the fire faster, but it works to enhance safety and safeguard the lives of firefighters and victims. When Cold Fire is applies to a fire, it quickly penetrates the hot surface and extracts the heat from a fire without steam conversion. (Water and foam do not have the same penetration capability of Cold Fire)